355/50R21 vs 345/50R21
Going from one to the other changes the overall height by -1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/50R21 | 345/50R21 | Change |
|---|---|---|---|
| Overall height | 35.0" | 34.6" | -1.1 % |
| Sidewall | 6.99" | 6.79" | -2.8 % |
| Section width | 355 mm | 345 mm | -2.8 % |
| Circumference | 109.9" | 108.6" | -1.1 % |
| Revs per mile | 577 | 583 | +1.1 % |
| Axle height | 17.49" | 17.29" | -5.0 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/50R21. Fit 345/50R21 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 89.0 mph | -1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,887 on the road, so it over-counts by 113. At a true 70 mph the first turns 673 times a minute, the second 680.