355/50R22 vs 335/50R22
Going from one to the other changes the overall height by -2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/50R22 | 335/50R22 | Change |
|---|---|---|---|
| Overall height | 36.0" | 35.2" | -2.2 % |
| Sidewall | 6.99" | 6.59" | -5.6 % |
| Section width | 355 mm | 335 mm | -5.6 % |
| Circumference | 113.0" | 110.5" | -2.2 % |
| Revs per mile | 561 | 573 | +2.2 % |
| Axle height | 17.99" | 17.59" | -10.0 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/50R22. Fit 335/50R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.5 mph | -1.5 |
| 90 mph | 88.0 mph | -2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,781 on the road, so it over-counts by 219. At a true 70 mph the first turns 654 times a minute, the second 669.