355/50R24 vs 345/55R24
Going from one to the other changes the overall height by +2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/50R24 | 345/55R24 | Change |
|---|---|---|---|
| Overall height | 38.0" | 38.9" | +2.5 % |
| Sidewall | 6.99" | 7.47" | +6.9 % |
| Section width | 355 mm | 345 mm | -2.8 % |
| Circumference | 119.3" | 122.3" | +2.5 % |
| Revs per mile | 531 | 518 | -2.5 % |
| Axle height | 18.99" | 19.47" | +12.3 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/50R24. Fit 345/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.3 mph | +1.3 |
| 70 mph | 71.8 mph | +1.8 |
| 90 mph | 92.3 mph | +2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,254 on the road, so it under-counts by 254. At a true 70 mph the first turns 620 times a minute, the second 604.