355/55R24 vs 345/55R24
Going from one to the other changes the overall height by -1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/55R24 | 345/55R24 | Change |
|---|---|---|---|
| Overall height | 39.4" | 38.9" | -1.1 % |
| Sidewall | 7.69" | 7.47" | -2.8 % |
| Section width | 355 mm | 345 mm | -2.8 % |
| Circumference | 123.7" | 122.3" | -1.1 % |
| Revs per mile | 512 | 518 | +1.1 % |
| Axle height | 19.69" | 19.47" | -5.5 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/55R24. Fit 345/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 89.0 mph | -1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,890 on the road, so it over-counts by 110. At a true 70 mph the first turns 598 times a minute, the second 604.