355/65R24 vs 345/65R24
Going from one to the other changes the overall height by -1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 355/65R24 | 345/65R24 | Change |
|---|---|---|---|
| Overall height | 42.2" | 41.7" | -1.2 % |
| Sidewall | 9.08" | 8.83" | -2.8 % |
| Section width | 355 mm | 345 mm | -2.8 % |
| Circumference | 132.5" | 130.9" | -1.2 % |
| Revs per mile | 478 | 484 | +1.2 % |
| Axle height | 21.08" | 20.83" | -6.5 mm |
| Approved rim width | 10–13" | 9.5–12.5" | overlap 10–12.5" |
Both are approved on a rim 10" to 12.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 355/65R24. Fit 345/65R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 88.9 mph | -1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,879 on the road, so it over-counts by 121. At a true 70 mph the first turns 558 times a minute, the second 565.